- Model NO.: CK20E, CK25E, CK30E
- Processing Accessory: Chuck CNC Lathe
- Tool Holder: Double-tool Holder CNC Lathe
- Controlling Mode: CNC
- Setting Mode: Floor-type
- Certification: SGS, CE, ISO 9001
- Trademark: BOCHI
- Type: Horizontal Lathe
- Guide Rail: Horizontal Guide Rail
- Power Source: Electric
- Automatic Grade: Automatic
- Precision: High Precision
- Condition: New
- Origin: China
1. The integrated base and bed casting has undergone a strict aging treatment, so high accuracy and rigidity is ensured.
2.High precision cartridge type spindle is equipped with a linear cylinder and cullet chuck.,the spindle rotates smoothly and high speed; turning roughness is up to Ra0.8~0.4.
3. Precision line guideways from Japan THK improved total rigidity of lathe so that the lathe have high precision and runs smoothly.
4.Precision pretensioned ball screw is located between guidways from Japan, side torque is eliminated, Imported bearings especially for screws are used and smooth transmission is ensured.
5. Feed screw in longitudinal and cross direction are directly connected with AC servo motors through zero clearance shaft couplings. High accuracy is ensured in transmission.
6.The unique dovetail comb type tool block ensures easy setting, quick and precise tool change and maximum repeatability.
7.Automatic feeding machine is installed in turret board, it' s convenient to come ture the connected cooperation automatic through the CNC control.
8. High preferment automatic intermittent lubrication system can centralized lubrication for guideways and screw ensure the lathe keep in a good lubricate station.
9.The control system of colored display screen with USB connector, it's convenient to transmission.
10.The external electric cabinet is easy to serve: the separated rear mounted coolant tank and chip box ensure fluent chip disposal and easy chip removal.
11.The machine is jointly driven mechanically, electrically and pneumatically,famous brand pneumatic ,electrical components ,reliable performance.
12.Full enclosed guard with Stainless steel protected ensure safe and friendly operation.
|Standard equipment||Optional equipment|
|FANUC 0i mate-TD|
High precision spindle bearing from Japan(front 3;rear 2)
Bearing specially for screw imported from Japan
THK precision linear ways from Japan
THK precision pretentioned ball screw from Japan.
Pneumatic draw down collet chuck
Servo main motor
Automatic lubrication system
Standard tool post
Automatic pull feeder
Standard collet chuck
Machine tool adjustment
Three color light of machine
4″hollow hydraulic 3-jaw chuck from Taiwan(CK20E/25E)
4″solid hydraulic 3-jaw chuck from Taiwan(CK20E/25E)
Domestic ball screw
5″hollow rotating cylinder
Pneumatic common control tail seat
Spindle dish type brake
Pneumatic/electric drilling/milling unit
Front/rear air blowing
Special tool seat
Special clamping chuck
Automatic bar feeding machine
|Capacity||Max.swing over bed||mm||φ240|
|Max.swing over slide||mm||φ120|
|Max.turning dia.over tool block||mm||φ70|
|Max maching length||mm||150|
|Spindle||Type of spindle nose||/||A2-3||A2-4|
|Size of spindle nose||mm||φ45||φ53.975||φ63.513|
|Thru-hole of spindle draw bar||mm||φ21||φ26||φ31|
|Max. speed of spindle||rpm||5000|
|Work chucking mode||Std. equip.: pneum. Collet chuck Opt. equip.: hyd. collet chuck/ 3-jaw chuck|
|Rapid traverse X/Z||m/min||20/20|
|Tool post||Type of tool post||Precision Dovetail comb type tool|
|Tool section: turning/boring||mm||12x12/φ25|
|Center height of tool||mm||35|
|Motor||Power of spindle motor||kW||2.2/3.7||3.0/3.7|
|Torque of spindle motor||Nm||14/23||19/23|
|Power of motor X/Z||kW||0.75/0.75|
|Torque of motor X/Z||Nm||3.5/3.5|
|Power of coolant pump motor||W||150|
|others||NC controller||FANUC 0i mate-TD(standard equ.)|
|Type of guideways||Precision linear guideways|
|Weight of machine||kg||1000||1050||1100|
|Dimension of machine(L×W×H)||mm||1320x1000x1415||1320x1130x1415|