- Model NO.: CK40E
- Processing Accessory: Chuck CNC Lathe
- Tool Holder: Double-tool Holder CNC Lathe
- Controlling Mode: CNC
- Setting Mode: Floor-type
- Certification: CE, ISO 9001
- Trademark: BOCHI
- Type: Horizontal Lathe
- Guide Rail: Horizontal Guide Rail
- Power Source: Electric
- Automatic Grade: Automatic
- Precision: High Precision
- Condition: New
- Origin: China
CK40E CNC Lathe
1. The integrated base and bed is casted through resin mold,which has undergone a strict aging treatment, so high accuracy and rigidity is ensured.
2. High precision through hole type main shaft structure ,with high speed holly rotary oil and precision collet chuck. It rotates max. 5000 rev/min. Turning roughness is up to Ra0.8~0.4.
3. The THK precision widened linear guideways from Japan improve the total rigidity of machine. Turning roughness is up to Ra0.8~0.4.
4. The THK precision ball screw from Japan is located between guide ways; side torque is eliminated. Bearings especially for screws are used and smooth transmission is ensured.
5. Feed screws in longitudinal and cross direction are directly connected with AC servo motors through zero clearance elastic shaft couplings. High accuracy is ensured in transmission.
6. The tool block has a widened T-shaped bottom plate so it can hold more tools. It ensures easy setting, quick and precise tool change and maximum repeatability.
7. Turret board equipped with automatic feeding machine,it's convenient achieve the corporation automatic through CNC control system.
8. The high performance automatic intermittent lubrication system lubricates the guideways and screws, making sure the lathe keep the good lubrication sate.
9. The NC controller has color display and USB port, so data transfer is simple.
10. The external electric cabinet is easy to service. The separate rear mounted coolant tank and chip box ensure fluent chip disposal and easy chip removal.
11. The machine is jointly driven mechanically, electrically and pneumatically. Equipped with high performance hydraulic station; full enclosed stainless steel guard ensures safe and friendly operation.
12. Full enclosed stainless steel guard ensures safe and friendly operation.
|Standard equipment:||Optional equipment:|
|FANUC 0i mate-TD|
High precision spindle bearing imported from Japan
Bearing especially for screw imported from Japan
THK precision liner guideways
THK precision prestressing ball screw
6″ hollow hydraulic rotating cylinder from Taiwan
6″ hollow hydraulic 3-jaw chuck from Taiwan
Servo main motor
Automatic lubricates system
Standard tool post
Machine tool adjustment ironpad
Three lights of machine
Full enclosed protection
6"solid hydraulic 3-jew chuck from Taiwan
Precision hydraulic collet and collet chuck from Taiwan
Spindle dish type brake
Ball screw bar from Taiwan
6"hollow rotating cylinder
Pneumatic common control tail seat
Frequency inverting motor
T - shaped turret boards and tool seat
Pneumatic/electric milling unit
Pneumatic automatic door
Automatic car feeding machine
|Capacity||Max. swing over bed||mm||φ320|
|Max. swing over slide||mm||φ160|
|Max. turning dia. over tool block||mm||φ120|
|Max. bar dia.||mm||φ42|
|Max. machining length||mm||150|
|Spindle||Type of spindle nose||A2-5|
|Size of spindle nose||mm||φ82.563|
|Taper of spindle bore||MT No.6|
|Thru-hole of spindle draw bar||mm||φ45|
|speed of spindle||rpm||100~4000|
|Workpiece clamping mode||hydraulic 3-jaw chuck|
|Rapid traverse X/Z||m/min||18/18|
|turret||Type of tool post||Dovetail precision comb tool|
|Tool section: turning/boring||mm||16x16/φ25|
|Center height of tool||mm||60|
|motor||Power of motor||kW||5.5/7.5|
|Torque of motor||Nm||52/71|
|Power of motor X/Z||kW||1.2/1.2|
|Torque of motor X/Z||Nm||7/7|
|Power of coolant pump motor||W||150|
|others||NC controller||FANUC 0i mate-TD(optional)|
|Type of guideways||Precision linear guideways|
|Weight of machine||kg||2250|
|Dimension of machine(L×W×H)||mm||1700x1600x1700|